Cable and data penetrations

Broadband, door entry, CCTV and TV. Each one went through a wall to get to you.

  • Every seal labelled and photographed
  • BM TRADA / FIRAS-certificated contractors
  • Written price before any work
Get a price

We reply with a written price.

We use these details to reply to you. See our privacy notice.

In a block of flats the walls between each flat and the corridor are fire separations. So are the floors. And every few years someone needs to get a new cable into every flat.

Fibre broadband is the biggest one lately, often more than one provider in the same block. Before that it was satellite TV, door entry phones, CCTV, fire alarm upgrades. Each installer drills or pushes through the walls and floors on the way. Most are focused on getting a signal to the flat, and the hole they leave is not their main concern.

Two cable trays passing through a board wall below a concrete slab, with a hanging rod
Two cable trays passing through a board wall below a concrete slab, with a hanging rod

What it looks like

A 20mm hole drilled through a corridor wall above the ceiling, with one cable through it and daylight round it.

A row of five or six such holes along the same wall, one per installer over the years.

A cable pushed straight through an existing batt seal in a riser, with a slit in the batt.

Trunking run through a wall with the inside of the trunking open from one side to the other.

How each is sealed

Small holes with one or two cables are packed and sealed with intumescent mastic to the depth on the data sheet, on both faces.

Groups of cables are brought together through one neat opening where possible, and sealed with batt and mastic or a cable sealing system.

Trunking through a wall gets an internal seal, such as an intumescent plug, at the line of the wall.

Seals that will be opened again, in risers where new providers keep arriving, can be pillows or a resealable compound.

Stopping it happening again

Every seal gets a label saying what it is and who to ask before adding a cable. When installers are booked into your building, give them that contact.

The sealing is done by our BM TRADA / FIRAS-certificated contractors.

Found a gap between flats?

Send the postcode, what the building is and a photo of the gap. We will tell you what it needs and give you a rough price.

Call 020 3002 6628Get a quote